Articles from section "Physical materials technology"

The scaling of misorientation angle distribution at strain-induced boundaries in copper deformed by tension under various conditions

Physical materials technology
  • Year: 2024
  • Volume: 17
  • Issue: 1
  • 9
  • 601
  • Pages: 71-80

Comparison of approaches to accounting for imperfect contacts when determining the effective permeability of material

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 4
  • 13
  • 850
  • Pages: 146-159

Boron phosphide grown by PECVD and its optical properties

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 13
  • 683
  • Pages: 273-277

Technology of manufacturing thin-film aluminum nanostructures by dry aerosol printing

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 9
  • 700
  • Pages: 282-287

Optical properties of photo-thermo-refractive glasses doped with terbium

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 9
  • 677
  • Pages: 278-281

Effect of Al-CuO multilayer thermite structures thickness on combustion behavior

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 8
  • 740
  • Pages: 267-272

Ultraviolet photoluminescence enhancement of zinc oxide nanocrystals in colloidal mixtures with spark discharge aluminum nanoparticles

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 7
  • 802
  • Pages: 261-266

Quantum dot-induced photoluminescence enhancement of InGaN nanowires

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 3
  • 734
  • Pages: 255-260

Study of morphology and composition of nanoscale AlGaN heterostructures obtained by PA MBE technique on the silicon substrates with the use of porous silicon as buffer layer

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 6
  • 673
  • Pages: 249-254

Formation of the anisotropic ITO-based orienting layers for the liquid crystal devices

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 4
  • 675
  • Pages: 244-248

Icing and chemical pollution sensor based on carbon nanoparticles-based superhydrophobic coating

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 3
  • 641
  • Pages: 239-243

Production of polyimide nonwoven fabric with low dielectric permittivity

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 16
  • 883
  • Pages: 233-238

Optical anisotropy of black phosphorus characterized by FTIR spectroscopy methods

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 10
  • 811
  • Pages: 228-232

Structural surface characteristics of aluminum-gallium nitride films on silicon carbide nanolayers on silicon

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 7
  • 741
  • Pages: 223-227

Mechanisms of residual polymer removal in solvent mixtures after the graphene transfer and effects on channel conductivity gate control

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 6
  • 692
  • Pages: 217-222

Study of n-diamond and carbon nanowalls structure synthsized by the RF-PECVD

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 2
  • 753
  • Pages: 211-216

Study of composite electrode material formation features based on super C45/RuO2 and super C45/MnO2 for asymmetric planar supercapacitors

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 9
  • 645
  • Pages: 206-210

Charge relaxation after exposure to barrier and corona discharge of polylactide films

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 5
  • 673
  • Pages: 200-205

The method of formation of planar lithium-ion batteries with composite electrode materials

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 0
  • 788
  • Pages: 194-199

Hard-template synthesis of monodisperse spherical microporous SiO2 particles

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 1
  • 660
  • Pages: 188-193

A facile low-temperature approach for organics removal from SiO2-CTAB mesoporous particles

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 0
  • 733
  • Pages: 183-187

On the wetting of polyethylene terephthalate substrates with multicomponent graphene oxide dispersions

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3.2
  • 2
  • 853
  • Pages: 177-182

Optimization of the microstructure of composite materials taking into account the constraints on their properties

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 3
  • 72
  • 1227
  • Pages: 73-86

Emission, optical and electrical properties of GaInP/GaP nanofilms

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 2
  • 14
  • 1573
  • Pages: 89-97

Formation of Mn4 Si7 films by magnetron sputtering and a wide range of their thermoelectric properties

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 2
  • 16
  • 1631
  • Pages: 78-88

Electric and thermoelectric properties of a coordination polymer based on phenazine ligands and silver

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 2
  • 22
  • 1568
  • Pages: 68-77

Synthesis and PL study of Sr3 (VO4 ) 2 :Eu3+ phosphor for W-LED application

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 2
  • 20
  • 1496
  • Pages: 61-67

Development of microfluidic devices for experimental study of cell migration activity, use of numerical methods

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 3
  • 1274
  • Pages: 253-259

Multilevel resistive switching in forming-free nanocrystalline ZnO films for neuromorphic applications

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 7
  • 1352
  • Pages: 247-252

BaTiO3 nanocrystalline thin films: synthesis, plasma treatment, and memristive effect

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 17
  • 1401
  • Pages: 241-246

Magnetic properties of heterophase film coatings based on a solid solution of cadmium sulfide and iron

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 7
  • 1545
  • Pages: 236-240

Zinc stannate nanostructures for low-temperature gas sensors with improved response and performance

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 17
  • 1312
  • Pages: 229-235

Synthesis of semi-polar GaN(11-22) on a nano-patterned Si(113) substrate

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 7
  • 1288
  • Pages: 224-228

Fabrication of nanoscale structures by FIB-induced deposition of materials and study of their electrical properties

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 5
  • 1353
  • Pages: 218-223

Temperature dependences of terahertz spectra of rutile grown by various methods

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 5
  • 1252
  • Pages: 212-217

Glycine and triglycine sulphate crystals doped with croconic acid: crystal structure, UV-VIS absorption, and dielectric properties

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 10
  • 1589
  • Pages: 204-211

Nanostructured high-strength high-modulus film polymer materials: statistical elastic and fracture mechanical properties

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 8
  • 1315
  • Pages: 196-203

Stimulated emission from asymmetric InAs/InAsSb/InAsSbP LED heterostructures

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 5
  • 1413
  • Pages: 191-195

Bottom-up approach to the formation of bi-resonant glass-metal nanocomposite

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 5
  • 1394
  • Pages: 185-190

Physical properties of GaN nanowires with core-shell InGaN/GaN insertions grown by PA-MBE on Si substrate

Physical materials technology
  • Year: 2023
  • Volume: 16
  • Issue: 1.2
  • 39
  • 1561
  • Pages: 179-184

The effect of crystallographic texture formation on the features of microstructure evolution in tensile-strained copper

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 4
  • 7
  • 1840
  • Pages: 147-155

Low-adhesive silicone rubbers for flexible light-emitting devices

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 6
  • 1791
  • Pages: 320-325

Independent control of size and shape of GaAs nanostructures during droplet epitaxy using ultra-low arsenic flux

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 13
  • 1886
  • Pages: 315-319

Plasma assisted molecular beam epitaxy growth of InGaN nanostructures on Si substrates

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 21
  • 1858
  • Pages: 311-314

Temperature-dependent exciton-polaritons in perovskite photonic crystal slab

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 8
  • 1768
  • Pages: 306-310

Thermoelectric properties of graphenylene nanotubes with encapsulated fullerenes

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 4
  • 1776
  • Pages: 300-305

Optimizing deposition regimes to fabricate vanadium dioxide film for active metasurfaces

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 15
  • 1918
  • Pages: 295-299

Synthesis and properties of nanostructure composites based on barium titanate and 3D metals

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 7
  • 1867
  • Pages: 290-294

Modification of the optical and electrical properties of NiO films by thermal annealing

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 11
  • 1847
  • Pages: 285-289

Physical properties of GaN/InGaN nanowires grown by PA-MBE on silicon substrate

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 25
  • 1901
  • Pages: 281-284

Aluminum nanostructures produced by aerosol dry printing for ultraviolet photoluminescence enhancement

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 13
  • 1989
  • Pages: 276-280

Study of structural properties and photoconductivity of Co3O4– ZnO thin films

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 11
  • 1882
  • Pages: 271-275

Surface and electrophysical properties study of thin TiO2-SnO2 nanocomposite films

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 9
  • 1976
  • Pages: 265-270

Optical studies of InP nanostructures monolithically integrated in Si (100)

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 16
  • 1832
  • Pages: 260-264

The effect of the seed layer on the TiO2 nanotubes coatings quality grown on the glass substrates by hydrothermal synthesis

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 8
  • 1896
  • Pages: 255-259

Langmuir-Blodgett technology to obtain semi- magnetic photosensitive materials

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 15
  • 1858
  • Pages: 250-254

Optical absorption and Raman scattering mapping of nanoparticles patterns formed in glass by nanosecond laser in UV, VIS and IR

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 4
  • 1808
  • Pages: 244-249

TEM contrast enhancement by adsorption of erbium ions on the inner surface of micro-mesoporous silica particles

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.3
  • 8
  • 1856
  • Pages: 239-243

Physicochemical analysis of bisretinoid A2E photooxidative destruction products

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.2
  • 21
  • 1961
  • Pages: 285-290

Ruthenium as an electrode material for the fast electrochemical actuator

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.2
  • 12
  • 1977
  • Pages: 280-284

Laser surface treatment of aluminum: correlation between thermal modeling and experimental study

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.2
  • 4
  • 1996
  • Pages: 274-279

Ferroelectric films for renewable energy

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.2
  • 8
  • 2306
  • Pages: 269-273

Polarization and electrophysical parameters of piezoceramic materials investigation

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.2
  • 3
  • 1726
  • Pages: 263-268

Activation of polylactide films by cold plasma dielectric barrier discharge to improve the interaction of fibroblasts

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.2
  • 13
  • 1850
  • Pages: 257-262

Changes in barrier properties of protective composite coatings on aluminum alloy during climatic testing

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 18
  • 2244
  • Pages: 253-258

Evolution of tribological properties of the composite coatings on AMG3 aluminum alloy during the atmospheric exposure

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 13
  • 2324
  • Pages: 248-252

Development of a technique for studying trimethylamine oxide solutions using planar SERS structures

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 26
  • 2314
  • Pages: 243-247

Laser-induced periodic surface structures formation and reversible crystallization in amorphous Ge2Sb2Te5 thin films as a result of femtosecond irradiation

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 25
  • 2320
  • Pages: 237-242

Effect of thermal annealing on the composition of Ge-Co nanostructure obtained by electrochemical deposition

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 9
  • 2143
  • Pages: 232-236

In vitro corrosion behavior of bioresorbable Mg-Ca alloy with hydroxyapatite-containing protective coating

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 19
  • 2391
  • Pages: 227-231

Investigation of changes in the composition of anodic TiO2 nanotubes at different stages of formation by AES and TOF SIMS methods

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 12
  • 2142
  • Pages: 222-226

Composition and morphology of calcium phosphate coatings formed on resorbable substrates based on pure Mg and Mg-HAp composite

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 18
  • 2293
  • Pages: 215-221

Influence of SPTFE on corrosion behavior of composite coatings during salt-spray test

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 17
  • 2357
  • Pages: 210-214

Anti-icing composite fluoropolymer coatings on titanium

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 22
  • 2302
  • Pages: 204-209

Preparation of layered double hydroxide on PEO-coated MA8 magnesium alloy: electrochemical and corrosion properties

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 18
  • 2169
  • Pages: 197-203

Evaluation of surface free energy of bioactive coatings in titanium and magnesium alloy

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 22
  • 2201
  • Pages: 191-196

Influence of phenol red in Earle’s solution on corrosion properties of coated and uncoated Mg alloy

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 28
  • 2286
  • Pages: 185-190

Semipolar GaN layers on nanostructured silicon: technology and properties

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 16
  • 2185
  • Pages: 179-184

Composite triazole-containing PEO-coatings for effective corrosion protection of AlMg3 aluminum alloy

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 16
  • 2275
  • Pages: 173-178

Influence of halloysite nanotube incorporation on the properties of PEO-coatings formed on MA8 magnesium alloy

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 18
  • 2259
  • Pages: 168-172

Micromagnetic modeling of the superparamagnetic fraction of Fe3O4–Fe3–x Tix O4 composites

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 17
  • 2295
  • Pages: 162-167

Effect of high-speed nonequilibrium on morphological and magnetic properties of melt-spun Co58Ni10Fe5Si11B16 alloy

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 12
  • 2184
  • Pages: 155-161

Effect of thermal annealing on grain size and phase changes in magnetron titanium oxide films

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3.1
  • 18
  • 2202
  • Pages: 149-154

Influence of the hydrogen skin effect on the nature of the fracture of steel specimens

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3
  • 20
  • 2366
  • Pages: 169-184

Effective diffusion properties of a polycrystal

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3
  • 33
  • 2463
  • Pages: 154-168

Influence of temperature on thermoelectric effect in the composite material based on carbon nanotubes and polyaniline

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 3
  • 23
  • 2471
  • Pages: 143-153

Features of the nanostructure formation in the Nd-Pr-Fe-B-system alloys: a study by AFM and MFM

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 2
  • 50
  • 2980
  • Pages: 34-45

Surfaces of cohesive bonds’ fracture in the multilayer systems: A comparative analysis

Physical materials technology
  • Year: 2022
  • Volume: 15
  • Issue: 1
  • 15
  • 3172
  • Pages: 62-69

Polarizing properties of perfluorosulfonic membranes modified with terbium

Physical materials technology
  • Year: 2021
  • Volume: 14
  • Issue: 4
  • 49
  • 3393
  • Pages: 126-134

Structure characteristics of nanoporous glass with the carbon-modified interface

Physical materials technology
  • Year: 2021
  • Volume: 14
  • Issue: 4
  • 65
  • 3584
  • Pages: 114-125

Modification of glass surface by a high electric field

Physical materials technology
  • Year: 2020
  • Volume: 13
  • Issue: 4
  • 47
  • 4377
  • Pages: 176-184

The stability of flame front and the composition of combustion products of ammonia in oxygen in the presence of hydrogen fluoride

Physical materials technology
  • Year: 2020
  • Volume: 13
  • Issue: 4
  • 45
  • 4732
  • Pages: 162-175

Hydrogen fluoride obtaining from uranium hexafluoride in the combustion mode

Physical materials technology
  • Year: 2020
  • Volume: 13
  • Issue: 4
  • 59
  • 4430
  • Pages: 149-161

Nanostructed carbon and organic films: spectral microwave and optical characteristics

Physical materials technology
  • Year: 2020
  • Volume: 13
  • Issue: 1
  • 64
  • 5405
  • Pages: 106-117

The interaction processes of silicon tetrafluoride and hexafluorosilicates with hydrogen-containing and oxygenated substances: a thermodynamic analysis

Physical materials technology
  • Year: 2020
  • Volume: 13
  • Issue: 1
  • 53
  • 5424
  • Pages: 92-105

The water vapor conversion during the interaction between an evaporated hydrogen fluoride solution and carbon in the filtration combustion mode

Physical materials technology
  • Year: 2019
  • Volume: 12
  • Issue: 1
  • 33
  • 5984
  • Pages: 105-116

Effective heat conductivity of polymeric composite materials: The influence of component properties

Physical materials technology
  • Year: 2018
  • Volume: 11
  • Issue: 4
  • 81
  • 6241
  • Pages: 85-94

Iron-containing glass topography and magnetic response obtained by magnetic force microscopy

Physical materials technology
  • Year: 2010
  • Issue: 4
  • 0
  • 5988
  • Pages: 113-117

Elastic-plastic properties and defect structure of ultracrystalline aluminium and aluminium alloys

Physical materials technology
  • Year: 2010
  • Issue: 4
  • 0
  • 5917
  • Pages: 104-113

A model for structure formation during bainite transformation in low-carbon low-alloyed steels

Physical materials technology
  • Year: 2010
  • Issue: 4
  • 0
  • 6081
  • Pages: 94-103

Optimal microstructures and exact lower bound of energy of elastic composites from two isotropic phases

Physical materials technology
  • Year: 2010
  • Issue: 3
  • 0
  • 6066
  • Pages: 112-121

A superficial low-temperature degradation of zirconia ceramics stabilized by ittrium oxide

Physical materials technology
  • Year: 2010
  • Issue: 3
  • 0
  • 5929
  • Pages: 110-111

Magnetic properties of a composite containing superconducting inclusions

Physical materials technology
  • Year: 2010
  • Issue: 3
  • 0
  • 6245
  • Pages: 105-109

The shape memory effect in copper-aluminium-nickel films

Physical materials technology
  • Year: 2009
  • Issue: 4
  • 0
  • 5946
  • Pages: 107-113

Microdistortions of VK8-alloy surface layer after electrospark alloying with titanic-alloy elements

Physical materials technology
  • Year: 2009
  • Issue: 3
  • 0
  • 6219
  • Pages: 100-102

Spall stability of ductile high-strength steels in rotation plasticity regime

Physical materials technology
  • Year: 2009
  • Issue: 3
  • 0
  • 6132
  • Pages: 95-99

The ion emission during the fracture of polymers

Physical materials technology
  • Year: 2018
  • Volume: 11
  • Issue: 2
  • 29
  • 6115
  • Pages: 106-118

Charge relaxation in partially crystalline R-BAPB polyimides under conditions of elevated humidity

Physical materials technology
  • Year: 2018
  • Volume: 11
  • Issue: 2
  • 27
  • 6072
  • Pages: 96-105

Morphology of dried nanogel films of bacterial cellulose impregnated with the silver nitrate solution

Physical materials technology
  • Year: 2018
  • Volume: 11
  • Issue: 1
  • 58
  • 6444
  • Pages: 112-121

Porosity and surface morphology of lead selenide – tin selenide layers on silicon substrates: X-ray diffraction studies

Physical materials technology
  • Year: 2018
  • Volume: 11
  • Issue: 1
  • 30
  • 6232
  • Pages: 102-111

Visible quantum cutting in green emitting BaF2: Gd3+, Tb3+ phosphors: an approach towards mercury-free lamps

Physical materials technology
  • Year: 2017
  • Volume: 10
  • Issue: 3
  • 89
  • 6293
  • Pages: 64-74

The structure and morphological properties of clinoptilolite modified by manganese dioxide

Physical materials technology
  • Year: 2017
  • Volume: 10
  • Issue: 1
  • 188
  • 6155
  • Pages: 100-111

Dielectric properties of the nanocrystalline cellulose – potassium iodide composites

Physical materials technology
  • Year: 2017
  • Volume: 10
  • Issue: 1
  • 173
  • 6044
  • Pages: 93-99

Synthesis and luminescence properties OF Ca5(PO4)3Cl:Eu2+ phosphor for solid state lighting

Physical materials technology
  • Year: 2016
  • Issue: 1
  • 270
  • 6430
  • Pages: 41-47

Influence of quantity of spray solution on the physical properties of spray-deposited nanocrystalline MgSe thin films

Physical materials technology
  • Year: 2016
  • Issue: 1
  • 251
  • 5809
  • Pages: 29-40

Advances in hydrotropic solutions: an updated review

Physical materials technology
  • Year: 2015
  • Issue: 4
  • 761
  • 6694
  • Pages: 119-138

Optical and thermal properties of PTh-co-PANI-Ti random copolymer composite for photovoltaic application

Physical materials technology
  • Year: 2015
  • Issue: 4
  • 252
  • 5840
  • Pages: 111-118

Elementary results on the dosimetric properties of SrSO4:Eu2+ phosphor

Physical materials technology
  • Year: 2015
  • Issue: 4
  • 400
  • 6132
  • Pages: 100-110

Modeling of the plasticity of microstructured and nanostructured materials

Physical materials technology
  • Year: 2015
  • Issue: 4
  • 374
  • 6064
  • Pages: 91-99

Liquefied-petroleum-gas sensing performance of CuO–Ag2O bimetallic oxide nanoparticles

Physical materials technology
  • Year: 2015
  • Issue: 3
  • 483
  • 6627
  • Pages: 53-60

A description of intragrained and intergranular hardening in mono- and polycrystals

Physical materials technology
  • Year: 2010
  • Issue: 2
  • 0
  • 5628
  • Pages: 110-119

The influence of heat treatment on dielectric  properties of ceramic oxide materials

Physical materials technology
  • Year: 2010
  • Issue: 2
  • 0
  • 5899
  • Pages: 107-110

A theory of indirect extrusion in superplasticity regimes

Physical materials technology
  • Year: 2010
  • Issue: 1
  • 0
  • 5642
  • Pages: 91-102

Kinetics modeling of austenite transformation in steels with ferrite-perlite structure

Physical materials technology
  • Year: 2011
  • Issue: 3
  • 0
  • 6306
  • Pages: 110-117

Durability of polymer light emitting diodes

Physical materials technology
  • Year: 2011
  • Issue: 4
  • 0
  • 5745
  • Pages: 142-146

The effect of the ion-exchange treatment and gamma-irradiation on the spectra of phosphate glasses doped with europium

Physical materials technology
  • Year: 2011
  • Issue: 4
  • 0
  • 5612
  • Pages: 137-142

Modelling of a creep and a damage processes for high-temperature chromium P-91 steel

Physical materials technology
  • Year: 2011
  • Issue: 4
  • 0
  • 6057
  • Pages: 130-136

New segmented cross-linked poly(esterurethansiloxane) elastomers for medical implants

Physical materials technology
  • Year: 2012
  • Issue: 1
  • 0
  • 5741
  • Pages: 100-107

Electrical phenomena at interfaces in heterogeneous poly mineral systems dispersed

Physical materials technology
  • Year: 2012
  • Issue: 1
  • 0
  • 6359
  • Pages: 93-100

The investigation of PVC-based nanocomposites by atomic force microscopy

Physical materials technology
  • Year: 2013
  • Issue: 1
  • 853
  • 7520
  • Pages: 114-119

Magnetostriction and magnetization of ferriferous glasses

Physical materials technology
  • Year: 2013
  • Issue: 2
  • 630
  • 6734
  • Pages: 144-148

Using atomic-force microscopy techniques for an analysis of ferroelectric and magnetic properties of bismuth-doped terbium manganite at low temperatures

Physical materials technology
  • Year: 2013
  • Issue: 2
  • 713
  • 7219
  • Pages: 137-143

Improvement and stabilization of optical characteristics of the porous silicon

Physical materials technology
  • Year: 2013
  • Issue: 2
  • 660
  • 6644
  • Pages: 130-136